Local Brake Repair | Bayside Auto Works

BAYSIDE AUTO WORKS > The Best Auto Repair And Maintenance Services > BRAKES

Whether you're in need of swift brake maintenance or repair services, you can rely on Bayside Auto Works for cost-effective solutions. Contact us at 352-556-5255 or visit our Spring Hill location for a comprehensive vehicle inspection, affordable recommendations, and efficient repairs to ensure optimal performance. To us, safety is paramount, so if you have any doubts about your brakes, reach out to us immediately!

Anti-Lock Brake System
The Anti-lock Brake System (ABS) ensures your wheels keep rotating during braking, preventing skidding and providing better control. If your ABS light illuminates, visit Bayside Auto Works for a diagnosis and professional repair.

Brake Fluid Flushes
Brake fluid can absorb moisture from the air over time, diminishing brake effectiveness and becoming corrosive, potentially harming the system. Regular brake fluid flushes are vital to ensure fresh fluid usage in your vehicle. Consult our technicians at Bayside Auto Works to determine the right time for a brake fluid flush.

Brake Hoses
A brake hose carries pressurized brake fluid from the master cylinder to the brakes. A damaged hose can lead to delayed or weak braking, and a leak may result in brake failure. While the need for a replacement brake hose isn't common, any signs of cracking or wear should prompt immediate replacement.

Brake Pad & Shoe Replacement
Squealing brakes often indicate brake pad issues. When brake pads deteriorate completely, a harsh metal-on-metal grinding noise occurs during braking, indicating potential rotor or drum damage. Although experienced individuals may attempt home repairs, if you have brake concerns, it's best to consult an auto repair professional promptly.

Caliper Replacement
The brake caliper houses brake pads and clamps around the rotor to apply pressure during braking. Caliper problems can cause uneven braking, leading to skidding during braking and loss of control in adverse weather conditions. Contact Bayside Auto Works in Spring Hill at your earliest convenience for assistance.

Resurface Rotors
In a disc brake system, rotors attach to your vehicle's wheels. The friction with brake pads over time creates grooves and cracks. The process of resurfacing restores rotors to a "like-new" condition, reducing noise and wobbling. At Bayside Auto Works, we inspect your rotors thoroughly and recommend the best course of action.

FAQs About Brakes

Why are my brakes making a grinding noise?

Grinding noises usually indicate that your car's brake system is overdue for maintenance. The grinding sound is usually caused by the brake pad being completely worn away or the brake shoe scraping on metal contact points.

Why are my brakes squeaking?

Noises coming from your brakes do not usually indicate a high-cost auto repair. It could be a foreign object such as a small stone or road debris. It could also be a signal that your brake-pads are wearing out and need replacing. As brake pads wear bits of metal in your brake pad come in contact with the rotor to create a squeaking noise when you apply the brakes.

Why are my brakes making a burning smell?

Overheated brakes cause a noticeable burning chemical smell. Pull over to a safe place and allow the brakes to cool. Ensure you did not accidentally leave the parking brake on. If there's any smoke coming from a wheel, it may be that the brake caliper is malfunctioning and locked in place. In this case, it may be unsafe to continue driving.

Why are my brakes vibrating?

If your car shakes or vibrates or wobbles when you apply the brakes, it indicates that the thickness of your rotor is uneven. Brake rotors are large, perfectly round, smooth metal discs that sit inside of the wheels. When the disc has become misshapen or unevenly worn it will vibrate or wobble when you hit the brakes. Left uneven, the material will continue to build on the uneven spots, making the problem worse over time. Come to Bayside Auto Works to get the face of your car's brake rotors resurfaced to fix the problem.

How do I know if my car is leaking brake fluid?

If your car does not stop as quickly as you expect you may be leaking brake fluid. This is a serious problem. An important part of the braking process involves brake fluid, which is used to create hydraulic pressure against the brake caliper. If your vehicle is leaking brake fluid, you won't be able to stop safely. We recommend taking your vehicle to an auto repair shop as quickly as possible if it is leaking brake fluid.

Why is my dashboard brake light on?

If the brake light indicator appears on your dashboard, it's either time for regular brake maintenance or an alert to a potential problem. Stop by Bayside Auto Works and let us help you diagnose this issue quickly.

What are the 3 signs that brake pads are worn?

The three most common sounds that indicate you need to replace your brake pads are squeaking, grinding or the dashboard brake indicator light coming on.

What is the 30-30-30 rule for brakes?

Brake specialists advise initiating new brake pads by using a 30-30-30 method: Perform 30 gradual stops from 30 mph, allowing 30 seconds between each stop for the brakes to cool. This process protects against excessive heat buildup until the resins in the pads have completely cured.

What percent of brake pad life is 3mm?

When you purchase a new brake pad, it has a standard thickness of around 8 to 12 mm or about a half inch. Over time, your car's brake pad will wear away. A brake pad at 3 mm or around one tenth of an inch will take around 40,000 miles of driving to completely wear out. Don't wait until then to replace your brake pads. Once your brake pads reach 3 mm it is recommended that you schedule an appointment to get them replaced soon.

What are the 3 types of brake pads?

There are three main types of brake pads in use today: non-asbestos organic, ceramic and semi-metallic. Come by Bayside Auto Works or consult your car's owner's manual to determine which type is best for your vehicle.

Why is my car pulling to one side when I am braking?

If your car is pulling to one side when braking it may be a bad brake hose or a caliper issue causing one brake to engage while the other is not. This causes a pull on the side where the brake is working properly.

To learn more about our Brake services, call us at 352-556-5255 or request a quote by clicking below:

Request Quote

Discover More About Brake Repair Services At Bayside Auto Works in Spring Hill

Tire Repair Services
Quick Lube Services
Contact Us

hours

Monday
Tuesday
Wednesday
Thursday
Friday
Saturday
Sunday

8:00AM - 5:30PM
8:00AM - 5:30PM
8:00AM - 5:30PM
8:00AM - 5:30PM
8:00AM - 5:30PM
Closed
Closed
Contact us

Bayside Auto Works

13743 Linden Dr
Spring Hill, FL 34609
352-556-5255
Email Us | Get Directions
Vehicle tips
- According to recent studies, 5 percent of all motor vehicle fatalities are clearly caused by automobile maintenance neglect.
- The cooling system should be completely flushed and refilled about every 24 months. The level, condition, and concentration of coolant should be checked. (A 50/50 mix of anti-freeze and water is usually recommended.)
- Never remove the radiator cap until the engine has thoroughly cooled. The tightness and condition of drive belts, clamps and hoses should be checked by a pro.
- Change your oil and oil filter as specified in your manual, or more often (every 3,000 miles) if you make frequent short jaunts, extended trips with lots of luggage or tow a trailer.
- Replace other filters (air, fuel, PCV, etc.) as recommended, or more often in dusty conditions. Get engine drivability problems (hard stops, rough idling, stalling, diminished power, etc.) corrected at a good shop.
- A dirty windshield causes eye fatigue and can pose a safety hazard. Replace worn blades and get plenty of windshield washer solvent.
- Have your tires rotated about every 5,000 miles. Check tire pressures once a month; let the tires cool down first. Don't forget your spare and be sure your jack is in good condition.
- Check your owner's manual to find out what fuel octane rating your car's engine needs then buy it.
- Keep your tires inflated to the proper levels. Under-inflated tires make it harder for your car to move down the road, which means your engine uses more fuel to maintain speed.
- Lighten the load. Heavier vehicles use more fuel, so clean out unnecessary weight in the passenger compartment or trunk before you hit the road.
- Use the A/C sparingly. The air conditioner puts extra load on the engine forcing more fuel to be used.
- Keep your windows closed. Wide-open windows, especially at highway speeds, increase aerodynamic drag and the result is up to a 10% decrease in fuel economy.
- Avoid long idling. If you anticipate being stopped for more than one minute, shut off the car. Contrary to popular belief, restarting the car uses less fuel than letting it idle.
- Stay within posted speed limits. The faster you drive, the more fuel you use. For example, driving at 65 miles per hour (mph) rather than 55 mph, increases fuel consumption by 20 percent.
- Use cruise control. Using cruise control on highway trips can help you maintain a constant speed and, in most cases, reduce your fuel consumption.
- Keep your engine tuned. A fouled spark plug or plugged/restricted fuel injector can reduce fuel efficiency as much as 30 percent.
- Inspect the engine's belts regularly. Look for cracks or missing sections or segments. Worn belts will affect the engine performance.
- Have the fuel filter changed every 10,000 miles to prevent rust, dirt and other impurities from entering the fuel system.
- Change the transmission fluid and filter every 15,000 to 18,000 miles. This will protect the precision-crafted components of the transmission/transaxle.
- Inspect the suspension system regularly. This will extend the life of the vehicle's tires.
Prev Slide Next Slide